Back panel final fitting..

Missed a cable rubber P clip so started off with that.

Next was to drill all the holes I had already punched.

The panel needed a clean and the holes made a little bigger before I finally fitted it.

I tiger sealed all the points the panel was going to rest on.

Screws all in place and a few clamps to hold it in position until the sealant sets.

Back panel, fixing rear loom and handbrake

Cut the holes for the handbrake cable to pass through the rear panel.

Fixed the rear loom in place so its all nice and secure.

Bastard back panel.

This panel is a pain in the arse..

Thought it was going to be quick and easy, WRONG!

Eventually got it fitted quite well. I've seen others have used velcro to fit in place seems like a good idea so it can be removed at a later date.  I'd like to make the tub as waterproof/wind proof as possible so I think I will screw and tiger seal in place.