Harness top mounts.

With the boot lid in place I secured the shoulder sections of the harnesses in place. Used caps for the IVA. I believe I also need to edge trim the metal brackets.

The harnesses look the nuts!

Harness fitting, lower anchor points

These are mainly pictures for the IVA to show the inspector the mounting points and bolts used.

Fitting drivers harness and seat

  Some more trim turned up today so I could finish off putting trim round the outside of the seats so I could finally fit them.

Also been holding off fitting the harness and seats as I've not been able to find a suitable cover for the reverse gear. Searching round the garage trying to find a solution and talking to the Misses about making a box cover at work.  Then I stumbled across the left over pieces of head protection, the perfect roll bar formed half circle made a perfect gear cover.

I used Tiger seal to stick the covers to the tunnel. I'm complete happy with the results as the tiger seal went everywhere and the covers were difficult to hold in place. 

The harnesses were bolted into position.

The harnesses look amazing, am really pleased with the results. I couldn't resist jumping in and strapping myself in. They hold you really firm but are still comfortable.

Bit concerned about the metal adjusters hitting on the plastic body so looking for some felt to stick to the body.

Harnesses turned up

I've been waiting 3-4 weeks for these to turn up. They were not cheap and I nearly cancelled them 2-3 times because of the cost but its the only think keeping me in the car so money well spent I guess, plus they look amazing!

I went for 3 inch straps shoulder and lap with upgraded aluminium adjusters on both.

These will be one of the last things I fit!  Not going to risk getting ruining them.