Needed a day off work so decided to spend the day working on the car.
Started off finishing off the wishbone holes. They were all cut just needed to make a couple more bigger.
Next it was time to trial fit the steering rack to make sure there was enough clearance.
Both the holes I had cut needed a little more tub taking off so it wouldn't hit the body.
All back together..
I picked a good day to have off.. Need some wheels on it now so I can roll it out the garage.
Nose temporarily fitted in the right place so I can fit the bonnet and get the scuttle fitted correctly.
I drilled the rails on the chassis, I ensured it was in a place where there was plenty of scuttle to hold it tight.
The scuttle was fitted and lined up correctly.
I then used a drill up through the hole to make the scuttle. I then drilled the holes and fixed it in place.
Bonnet rested in place, fits really well. Meets up to the scuttle and nose perfectly.
Starting to look like a car.. Love the colour!
Next was to fit the nose. I predrilled one hole either side.
Once in place in place I marked the holes on the tub.
Then bolted it into place.
