Fitted the radiator temporarily as I wanted to make an adapter to mount the oil cooler.
I had some angle aluminium in stock that I have seen used before to mount oil coolers, it seemed to work well.
I made sure there was just enough room for the pipework to fit in place. The pipework has to go in from the top to avoid any airlocks.
Really pleased with the results, doesn't look too bad and its really strong.
Laid out the braided hoses and marked the lengths. I am sending these back to AB performance to cut to length and fit the fittings. They offer these as a service and I am just sending them back my tank to have a fuel pump and swirl pot welded in.
No comments:
Post a Comment